FIELD TOOLS / RADIO LINKS
WISP link budget calculator
Check a radio budget before a site visit. Enter the radio specifications for one direction of the link.
No signup. Inputs stay in this tab. Once loaded, calculations work offline; keep the page open.
Explore WISP operations — guided pilotLink inputs
Range: 100 … 100000
Range: 0.001 … 200
Range: -50 … 60
Range: -20 … 60
Range: -20 … 60
Range: 0 … 100
Range: 0 … 100
Range: -150 … 0
Use the manufacturer’s sensitivity for your MCS, channel width and target error rate. The example −75 dBm is not a radio preset.
Estimated budget
Marginal free-space budget
Consider a higher-gain dish within your EIRP limit, or a lower MCS with better sensitivity.
- Free-space path loss
- dB
- Received signal
- dBm
- Fade margin
- dB
- Midpoint Fresnel radius
- m
- 60% clearance target
- m
- Transmit EIRP
- dBm
If obstacles enter this clearance target, raise the mast or change the path. This is a radius around the line of sight, not a mast height.
Free space only: no terrain, Earth curvature, diffraction, vegetation, interference, rain, atmospheric absorption or alignment losses. At 60 GHz, oxygen absorption and rain can dominate: a solid free-space budget does not establish a usable link. Check both directions separately; no throughput or uptime is predicted.
What this estimate leaves out
Free space only: no terrain, Earth curvature, diffraction, vegetation, interference, rain, atmospheric absorption or alignment losses. At 60 GHz, oxygen absorption and rain can dominate: a solid free-space budget does not establish a usable link. Check both directions separately; no throughput or uptime is predicted.
EIRP limits vary by country regulator, frequency band and installation. Check the applicable limit before selecting transmit power or antenna gain. This tool does not check regulatory compliance.
Formulas and assumptions
With d in metres, f in Hz and c = 299,792,458 m/s: λ = c/f; FSPL = 20 log₁₀(4πd/λ). Received signal = Tx power + Tx gain − Tx loss − FSPL + Rx gain − Rx loss. Fade margin = received signal − sensitivity. At midpoint, r₁ = √(λd/4); clearance target = 0.6r₁. EIRP = Tx power + Tx gain − Tx loss.
Screening rule: below 0 dB margin → will fail at the entered sensitivity; 0 to less than 20 dB → marginal; 20 dB or more → solid free-space budget. These are tool heuristics, not an availability guarantee or ITU thresholds.
Formula sources: ITU-R P.525 · ITU-R P.526
Can I use this for a point-to-multipoint network?
Calculate each AP-to-subscriber path separately with its own distance, antennas and sensitivity, then repeat for the reverse direction. This does not model airtime, shared capacity or interference.
From a calculation to WISP operations
This standalone educational tool does not mean ISPAgents plans or validates wireless links. Wireless link verdict in the product: coming.
Explore WISP operations — guided pilot